Aluminium Corrosion Controller CWT Extended Life Coolant –  XLI

Description
A biostable synthetic corrosion inhibitor that gives high levels of corrosion protection to water systems and possess extremely good scale inhibition. Aquamarine Aluminium corrosion Controller gives long life corrosion protection to a very wide range of engine metals including aluminium, iron and copper. Compatible with glycols for protection against freezing it is recommended to change every 5 years or 30000 hours in marine applications.

Recommended dilution rate is 5-10% with a minimum of 5% or as per engine manufacturer’s recommendations.
•The correct dosage should be checked using the Aquamarine Coolant Refractometer.
•The engine manufacturer’s recommendations for water quality should always be followed.
•Chloride levels should normally be kept below 50ppm.

Specific log sheets are available in hard copy pad format and in pdf.  Logs are forwarded to Aquamarine monthly for review and comment.  This is a free service to our customers.

Aquamarine Aluminium Corrosion Controller has been Approved by most major engine manufacturers.

Aluminium Corrosion Controller Test Meter
Available in 5, 25. 205 and 1000 litre containers.
NSN J100 6850-99-666-5296 Product Ref. 0005