Approved Type II & III OSD High Performance

Approved Type II & III OSD High Performance

Oil Spill Dispersant
A high performance, low toxicity oil spill dispersant developed to meet the requirements of Warren Spring Laboratory Specification LR 448(OP). Superdispersant 25 is approved as a Type 2 and Type 3 dispersant under Test Qualification CSR 4600/8902798 Superdispersant 25 has been tested by the Fisheries Laboratory of the Ministry of Agriculture, Fisheries and Food and was found to be of low toxicity to crangon
(brown shrimp) and patella vulgata (common limpet). This makes Superdispersant 25 suitable for use at sea, on beaches and rocky shores.
Due to the low toxicity of Superdispersant 25 it has been awarded license MAFF/FEPA 53/98

• Does not contain hydrocarbon solvents
• Completely biodegradable in the marine environment
• Ministry approved product
• Low toxicity

Rate of application should be 1 part to 20 – 30 parts of oil, although this will depend on many factors, which include, type of oil, viscosity, degree of weathering, ambient temperature and prevailing conditions.
In general, the oil should be treated quickly, as weathering increases the viscosity of the oil and this necessitates a subsequent increase in dispersant requirement.

Type 2 : (water dilutable) Concentrate. Premix at a ratio of 1 part to 10 parts of sea water and spray onto the slick using surface breaker boards or other enhanced agitation techniques to give greater mixing of the dispersant/oil emulsion.

Type 3 : (undiluted mode) Ready to Use. Use neat with appropriate spraying equipment from aircraft or vessels onto the slick. In all circumstances the Type 3 mode is the preferred method being more efficient in breaking down oil.

Available in 25, 205 and 1000 litre containers
Product Ref. 0046